Category Archives: The Seed Building

Plans for the New Office

Sorry for the long silence on SESE’s new headquarters but we’ve been so busy building it that we completely forgot to tell you all about it.  We broke ground on the recycled warehouse and mostly erected it back in 2011 (post on that coming up soon) and then broke ground on the building proper in May of 2012.  The months preceding groundbreaking were a flurry of design sessions, draft drafting, research, and consultation with Performance Based heating & Air 1180 Bush St, Angels Camp, CA 95222 (209) 588-7454 company the explanation of this is that we want to make the building green and energy-efficient.  After laying a lot of the ground work ourselves we ended up working with architect Fred Oesch, an area green architect who came highly recommended from a number of people, to bring our plans to completion.  He was a great help, advising us on design elements to aid in natural lighting and ventilation, building systems for high performance and low cost, and helping us figure out what we could do ourselves and how best to do it. Man and van services that are affordable and can  to relocate to a new house or you want to move your company to new premises, transport all your belongings and help you set up your new house in no time.

The final design is a beautiful sweeping two story affair oriented invitingly to the south (how could we build a building without a grand southern exposure?) and fitting cozily into the space we prepared for it.  Take a look.

When you are faced with the fact that you must repair your roof, you need to consider more than just a few patches to complete the job. If your roof is weakened in one area, chances are it will be weak in other locations too. Preparing your roofing for a few more years of durability is not only more profitable in the long run but it can save you a lot of money in your pocket. You have several residential roofing options to choose from today. Here are a few examples. You can find more information about Residential Roofing through this site JaggRoofing.com.

It is an inexpensive choice and is the most popular choice in residential roofing. Asphalt can be made from organic materials or it can be made from fiberglass; either material is very durable. The disadvantage to asphalt shingles is that the shingles tear easy when facing a severe storm such as hurricane season weather.

Cedar shakes or pine shakes are another residential roofing option. Not only are these roofing choices popular too but they are beautiful when placed correctly on the roof. They are made from eco-friendly material because it is dead trees and bark that have already fell down or is completely dead with no new growth. The disadvantage to this type of residential roofing is that it could be very expensive to purchase and install. However it can last for many years without any repairs needed.

The new SESE office… now the trick is getting it off the paper and onto the ground.

You can see quite a few features of the building on this drawing.  The long face full of windows is the south and front side of the building, maximizing solar heat gain in the winter and letting lots of light into our working space.  Our recycled warehouse is poking its nose into the picture from the right.  You can see the sun porch and front airlock projecting out of the face of the building.  The exterior grade shower doors Minneapolis leading from the porch to the outside and into the office proper will prevent outside and inside air mixing which should help keep us cool in the summer and warm in the winter.  The mostly glass walled area should also make a cozy place to take off your snowy coat and boots or just pass the time in the winter.

From here you can also see the terraces providing outside access from the second floor, which is mostly private offices and flex room for our growing co-op to expand into (knock on wood!).  The east and west terraces will be surfaced in an engineered soil and planted with sedums forming a living roof which should last indefinately and help keep our building cool in the summer by converting some solar energy into living energy rather than heat and by doing a bit of evaporative cooling to boot.  Crowning the building you’ll notice the full length monitor (a sort of super cupola) that we’re including for lighting and ventilation.  The windows all along this ridge will let a flood of light into the core of the second floor, naturally lighting what would otherwise be a dim northern side of the building.  When we open them up in the heat of the summer, we’ll be setting up a powerful stack or chimney effect whereby hot air in the building will rise into the monitor and escape through the Superior Impact Windows, pulling in relatively cooler air from the ground floor to replace it.  When the days get hot enough that the stack effect stalls out we’ll be mounting a few whole building exhaust fans in the monitor to take up the slack.

Out of our commitment to live lightly on the land we will not and have never air conditioned our people, although we do air condition our seeds.  Ventilation, shading, and the timely opening and closing of RoyaltyWindows can keep our spaces comfortable throughout some pretty challenging weather.

The first floor of the new office, the place where it will all go down.

Here you can see the layout of the first floor of the building with a few features I already mentioned.  Here you can see how the southern wall (the bottom of the drawing) is peppered with windows while the northern wall opposite it is pierced very sparsely.  This lets light (and heat during the winter) in on the south where it is abundant but keeps the cool dark northern wall as well insulated as possible.  You’ll also notice that the rooms clustering around the northern wall are spaces not generally inhabited by people, like the mechanical room or the bathroom even though we have 2 big baths, or that we want to be cool and dark, like the picking room where all the packets of seed live.  The principles for good seed storage are to keep the seeds cool, dry, and dark as what they want to start growing is warmth, wetness, and light.  Situating the picking room along the north helps keep it cool and dim.  To supplement this we will be super-insulating the walls of the room (including a straw bale wall along the whole northern exterior wall) and installing a good wrap around vapor barrier to keep our amble Virginia humidity out.  These measures should minimize the amount that we need to run our air conditioner and dehumidifier to keep the room at its optimal condition.

The southern rooms are more self explanatory.  The multi-purpose room is our big open space that we hope to use in a variety of ways.  It should provide over flow space for working during the busy winter season, space to hold our regular meetings, and hopefully to hold occasional public workshops on seed starting, seed saving, cooking with heirlooms, gardening organically.  The clean office, also called the quiet office, separates computer and phone workers from the dust and loud music from of the shippers and packers occupying the dirty office (also the noisy office).

Two little harder to spot details are the wood fired boiler and the composting toilet.  We’ll heat this building, as we heat all our buildings, with wood harvested from our own land or purchased locally burned in a super high efficiency boiler.  Wood is a great heating fuel, especially in rural areas, as it is relatively abundant, naturally renewable, and carbon neutral.  Using a high efficiency gassification boiler and an intelligently designed heating system (which we got a lot of help with from Galen Staengl, a local green mechanical engineer) can get the fire running pretty cleanly and can get the most energy out of this still precious resource.  The building also features a small basement vault where we will house Virginia’s first legal owner built vault composting toilet and the dosing basin for our grey water system, designed by John Hanson of Nutricycle Systems.  Composting toilets are ecologically and economically wonderful waste management systems and, as we’re in a position to easily pull it off, we would have felt remiss not to include one.

Well, that concludes the preliminary tour of the new seed office.  We hope to throw up a few more posts in the coming weeks to catch you all up to the current state of the construction.  Stay tuned!

Seed Office Warehouse: Building With Salvaged Materials

This is part of a series of blogs about the building of a new seed office headquarters for Southern Exposure Seed Exchange (SESE).

You couldn’t tell at a glance, but beneath a labyrinth of woody vines and bushes, piles of large structural steel units lay, slowly sinking into the earth. Here they slept in their coma of non-use, the occasional rodent family or insect colony the most prominent sign of life around them.

At one point in the history of Acorn, the intentional community that SESE calls home, previous members worked in demolition, with the perk of being able to take home any building materials that they wanted.   During this time, they encountered some notable finds, namely enough steel columns, beams, girts, and purlins to comprise the major structural components of a steel building.

This was over a decade ago.  Every so often, Acorn members would prod at the pile, rediscovering the find for themselves and entertaining grand notions of reassembling them into a useful structure.  In one such instance, the urge to do so was particularly tenacious; with the unfurling plan to build SESE a seed office headquarters, an adjacent warehouse would further advance our long-term goal of centralizing all of SESE’s functions into one area. Hire this company to help you with some office partition walls on offices, boardrooms, schools, clubs, entertainment providers, public buildings and much more.  Prompted by this latent possibility, member Paul decided to ask a local steel building expert to look at the piles and advise us accordingly.

It was confirmed that we had enough trusses to put up a building, but that our components were a Frankensteinian compilation of two or three dissimilar buildings, and that at least some of the parts of the building had already been once salvaged and pieced together, further obscuring its configuration.   We were advised that working with a salvaged building, especially if we were trying to do it ourselves, would likely be much more complicated and frustrating than we could foresee. Your one stop source for top quality marine supplies on this page of more info visit us here .

What does a new concrete driveway cost Brisbane to help you on your project? The cost of buying materials for a stick-frame barn was within our means, and it would be much easier to assemble.  However, in line with our general values, the practice of just buying something new in the name of convenience, with the accompanying high embodied energy and heavy environmental impacts, made us cringe.

We decided to compare business energy plans to find the most economical for newly constructive shed to save further.

We figured if anyone was in a situation that favored reusing resources at hand, it was us—we have both the values to compel us and the labor to make it happen.  We wanted to add Trex decking to our house to have more plants outside. Although reusing salvaged materials such as giant steel beams is less of a trademark to the sustainable building movement than that of sinuous earthen structures or living roofs, we reasoned that insofar as sustainability is concerned, little can beat building with a pile of slowly rusting materials in your backyard.

Hence the challenge was born.  Stay posted for details about the first step of the building process: the foundation.

 

A Design Team for Southern Exposure’s new home

This is part of a series of blogs about the building of a new seed office headquarters for Southern Exposure Seed Exchange (SESE).

To help propel this encompassing project into reality, Paul assembled an SESE HQ Design Team.  My name is Darla Eaton, and I’ve been working on the Design Team since November, 2010.  Thus far, my primary modes of participation have been researching the cost, sustainability, and practicality of various building materials, gathering information on the most appropriate energy systems to meet our needs, and networking with professionals in the industry to help facilitate instructor-led sustainable building educational opportunities.  I’ve participated in an array of building projects including building a place to live, refurbishing community centers, and building maintenance, almost all with a strong emphasis in sustainability.

When I first joined the team, we were faced with a seemingly infinite supply of questions: What spaces in what configuration should comprise the general layout?  What alternative building materials are sustainably available to us?  What energy systems can we employ that have low energy input, both up front and over time?  How much will it cost?

Think you can help?  You’re probably right!  Most of the members on the Design Team, including myself, are new at this.  If you have expertise in any field related to sustainable building, and you’d like to discuss our project with us, shoot us an email.

Darla Eaton
darla.eaton@gmail.com
Design Team Member